NETGEAR AC1900 Model R7000 User Manual

Use VPN to Access Your Network
137
Nighthawk AC1900 Smart WiFi Router Model R7000
Set Up a VPN Connection
A virtual private network (VPN) lets you use the Internet to securely access your network
when you aren’t home.
Secure
remote access
Internet
Open VPN
Client
Figure 14. VPN provides a secure tunnel between your home network and a remote computer
This type of VPN access is called a client-to-gateway tunnel. The computer is the client, and
the router is the gateway. To use the VPN feature, you must log in to the router and enable
VPN, and you must install and run VPN client software on the computer.
Note: The router currently does not support iOS and Android VPN client
software.
VPN uses DDNS or a static IP address to connect with your router.
To use a DDNS service, register for an account with a host name (sometimes called a
domain name).
You use the host name to access your network. The router supports these
accounts: NETGEAR www.no-ip.com, www.no-ip.com, and www.DynDNS.org.
If your Internet service provider (ISP) has assigned a static WAN IP address (such as
50.196.x.x or 10.x.x.x) that never changes to your Internet account the VPN can use that IP
address to connect to your home network.

NETGEAR AC1900 Model R7000 Specifications

General

Brand	NETGEAR
Model	AC1900 Model R7000
Category	Network Router
Language	English