Wireless Cable Voice Gateway Model CBVG834G Adminstrators User Manual
Installing the Gateway 1-9
v1.0, February 2008
Connecting to the Internet and VoIP
To configure the gateway to connect to the Internet you must log in as the user name MSO with
the default password of changeme, or whatever password you have set for MSO.
1. From the main menu, select Basic Settings. The Basic Settings screen displays:
The settings displayed on this screen depend on the selection in the Cable Network Settings
field. By default, DHCP is selected, as shown in the previous figure.
2. Enter the Network Configuration settings, and adjust the Cable Network Settings field if
needed.
The fields in this screen are described in Table 1-2.
3. Click Apply so that your changes take effect.
4. If you have VoIP service, connect the phone to a Voice Port 1. If your service includes a
second line, you can connect that phone to Voice Port 2. To check the voice status, see
“Viewing and Emailing Event Logs” on page 4-4. To set up a wireless connection, see
Chapter 2, “Wireless Configuration”.
Figure 1-5
To Next Page
Loading...
Need help?
General