Wireless Cable Voice Gateway Model CBVG834G Adminstrators User Manual
2-10 Wireless Configuration
v1.0, February 2008
WPA2-PSK (WiFi Protected Access 2 Pre-Shared Keys)
Not all wireless adapters support WPA2-PSK. Furthermore, client software is required on the
client. Windows XP and Windows 2000 with Service Pack 3 or above do include the client
software that supports WPA2. Nevertheless, the wireless adapter hardware and driver must also
support WPA2. Consult the product document for your wireless adapter and WPA client software
for instructions on configuring WPA settings.
To configure WPA2-PSK:
1. On the Wireless Settings screen, select WPA2-PSK (Wi-Fi Protected Access 2 Pre-Shared
Key).
2. Enter the Security Encryption (WPA2-PSK) settings:
• Pre-Shared Key. Enter a word or group of printable characters. The passphrase must be 8
to 63 characters in length. The 256 Bit key used for encryption is generated from this
passphrase.
• Key Lifetime. Enter the key lifetime in minutes.
3. Click Apply to save your settings.
Figure 2-5
To Next Page
Loading...
Need help?
General