Wireless Cable Voice Gateway Model CBVG834G Adminstrators User Manual
4-12 Managing Your Network
v1.0, February 2008
To activate UPnP:
1. From the main menu, select UPnP. The UPnP screen displays:
2. Select the Turn UPnP On check box, and then click Apply.
To save, cancel or refresh the table:
• To save the new settings to the gateway router, click Apply.
• To disregard any unsaved changes, click Cancel.
• To update the UPnP Portmap table and to show the active ports that are currently opened by
UPnP devices, click Refresh.
Viewing MTA Status
The MTA Status screen shows the status of the voice ports on the gateway. From the main menu,
under the Setup heading, select MTA Status. The MTA Status screen displays:
Figure 4-8
Note: To view MTA Status you must log in as MSO.
Figure 4-9
To Next Page
Loading...
Need help?
General