NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch User Manual

GS700TS Smart Switch Software Administration Manual
6-30 Managing Security
v1.0, June 2009
4. Enter the ACL Name in the provided field in the first, editable row.
5. Click APPLY to update the device.
To remove an IP-based ACL entry:
1. Click Security > ACL > IPv6 ACL. The IPv6 ACL screen displays.
2. Select the ACL entry.
3. Click DELETE to remove the entry.
IPv6 Rules
The IPv6 Rules screen allows an IPv6 Rule to be defined within a configured ACL. Rules can be
added only if the ACL is not bound to an interface.
To define IPv6 Rules:
1. Click Security > ACL > IPv6 Rules. The IPv6 Rules screen displays:
The IPv6 Rules screen contains the following fields:
IPv6 Rules
• ACL Name – Select the ACL Name from the list.
IPv6 Rules Table
• Priority – Enter the rule priority. When the packet is matched to a rule, user groups are
either granted permission or denied device management access. The rule number is
essential to matching packets to rules, as packets are matched on a first-fit basis.
• Protocol ID – Enter the protocol in the rule to which the packet is matched.
Figure 6-19

NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch Specifications

General

Brand	NETGEAR
Model	GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch
Category	Switch
Language	English