A-1
V1.0, June 2009
Chapter A
Default Settings
This appendix provides default settings for the NETGEAR Model GS700TS Smart Switch. You
can always configure the switch to default settings by using the Factory Reset function from a Web
browser.
Table A-1. Default Settings
Feature GS700TS Default Setting
Port Speed Auto-negotiation
Port Duplex Auto-negotiation
Flow Control (half duplex) Disabled
Flow Control (full duplex) Disabled
IP Configuration DHCP enabled
Password password
VLAN 802.1q based VLAN
Link Aggregation (Trunk) Disabled
Traffic Prioritization (QoS) Optimized for flow control, all ports set normal priority
To Next Page
Loading...
Need help?
General