NETGEAR R7960P User Manual

Cable Your Router
The following image shows how to cable your router:
Figure 4. Cable your Router
To cable your router:
1.
Unplug your modem’s power, leaving the modem connected to the wall jack for
your Internet service.
If your modem uses a battery backup, remove the battery.
2. Plug in and turn on your modem.
If your modem uses a battery backup, put the battery back in.
3.
Connect your modem to the Internet port of your router with the black Ethernet
cable that came with your router.
4. Connect the power adapter to your router and plug the power adapter into an outlet.
5.
Press the Power On/Off button on the back panel of the router.
User Manual15Hardware Setup
Nighthawk X6S AC3600 Tri-Band WiFi Router Model R7960P

NETGEAR R7960P Specifications

General

Brand	NETGEAR
Model	R7960P
Category	Network Router
Language	English