NETGEAR R7960P User Manual

Set Up WAN Aggregation to Get Multi-Gig
Internet
To get multi-gig Internet with your router, you can set up Internet port aggregation (or
WAN aggregation) by aggregating the Internet port and Ethernet port 1 on the router.
To set up Internet port aggregation, you need the following:
•
A service provider that offers an Internet speed that's over 1 Gbps.
•
A modem that supports an Internet speed that's over 1 Gbps and Internet port
aggregation.
To set up Internet port aggregation:
1. Set up Internet port aggregation on your modem.
For information about how to set up Internet port aggregation on your modem, see
the documentation that came with your modem.
2. Log in to your router and enable Internet port aggregation:
a.
Launch a web browser from a computer or mobile device that is connected to
the router network.
b.
Enter http://www.routerlogin.net.
A login window opens.
c. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
d.
Select Internet.
The Internet Setup page displays.
e.
In the WAN Preference section, select the WAN aggregation (1 Gbps + 1 Gbps)
radio button.
f.
Click the Apply button.
Your settings are saved.
3. Connect the Internet port and Ethernet port 4 on your router to two Ethernet ports
on your modem.
User Manual92Manage Network Settings
Nighthawk X6S AC3600 Tri-Band WiFi Router Model R7960P

NETGEAR R7960P Specifications

General

Brand	NETGEAR
Model	R7960P
Category	Network Router
Language	English