English – 23
13
TECHNICAL SPECIFICATIONS
All technical specications stated herein refer to an ambient temperature of 20°C (± 5°C). • Nice S.p.A. reserves the right to modify its products
at any time deemed necessary, while nonetheless maintaining the same intended use and functionality.
ROAD (RD400)
Product type Electromechanical gearmotor for the automatic movement of sliding gates for residential use,
inclusive of electronic control unit
Pinion
Z: 15; Module: 4; Pitch: 12.5 mm; Primitive diameter: 60 mm
Maximum inrush torque
12 Nm; corresponding to the capacity to move a leaf with a static friction of up to 400 N
Nominal torque
5 Nm; corresponding to the capacity to keep a leaf moving with a dynamic friction of up to
167N
Speed (no load) 0.25 m/s; the control unit allows for programming speeds of: 0.13 m/s or 0.25 m/s
Nominal torque speed 0.16 m/s
Maximum frequency of operating cycles 50 cycles per day (the control unit limits the cycles to the maximum specied in Tables 1 and 2)
Maximum continuous operating time 9 minutes (the control unit limits continuous operation to the maximum values given in Tables 1
and 2)
RD400 power supply
RD400/V1 power supply
230 V (+10% +15%) 50/60 Hz
120 V (+10% +15%) 50/60 Hz
Fuses F1: 1 A Type T (250 V) - F2: 2 A Type T (250V)
Maximum power input 210 W (1.1 A)
Insulation class 1 (a safety earthing system is required)
Warning light output For 1 ELDC ashing LED
STOP input For normally closed, normally open or 8.2 kΩ xed resistance contacts; with self-recognition
(any variation from the memorised status triggers the “STOP” command)
Step-by-Step input For normally open contacts (closing of the contact triggers the Step-by-Step command)
Radio ANTENNA input 52 Ω for RG58 or similar type cable
Radio receiver Incorporated
Programmable functions 3 ON-OFF functions and 3 adjustable functions (see Tables 13 and 15)
Auto-recognition functions Self-recognition of the type of “STOP”
Self-recognition of the gate opening and closing positions and calculation of the slowdown and
partial opening points
Operating temperature –20°C ... +55°C
Protection rating
IP 44
Dimensions and weight
330 mm x 195 mm x h 277 mm; 8 kg
RADIO RECEIVER
Product type 4-channel receiver for incorporated radio remote control
Frequency
433.92 MHz
Coding 52-bit FLOR-type digital rolling code
64-bit SMILO-type digital rolling code
Transmitter compatibility * Supported protocols: Flor, O-Code, Smilo
Memorisable transmitters Up to 100 if memorised in Mode 1
Input impedance 52 Ω
Sensitivity better than 0.5 µV
Transmitter range From 100 to 150 m; this range can vary if there are obstacles or electromagnetic disturbances,
and depends on the position of the receiving antenna
Outputs For the commands see Tables 4 and 5
Operating temperature –20°C ... +55°C
* the rst transmitter that is inserted also determines the type of those introduced subsequently.
To Next Page
Loading...
Need help?
General
