English – 1
CONTENTS
GENERAL WARNINGS:
SAFETY - INSTALLATION - USE 2
1 - PRODUCT DESCRIPTION AND INTENDED USE 3
2 - OPERATING LIMITS 3
3 - INSTALLATION 3
4 - ELECTRICAL CONNECTIONS
4.1 - Types of electrical cables 9
4.2 - Electrical cable connections 9
5 -
STARTING THE AUTOMATION AND CHECKING THE CON-
NECTIONS
5.1 - Selecting the direction 10
5.2 - Connecting the automation to the mains electricity 11
6 - TESTING AND COMMISSIONING
6.1 - Testing 12
6.2 - Commissioning 12
7 - PROGRAMMING
7.1 - Programming buttons 13
7.2 - QUICK SET-UP 13
7.3 - Recognition of the gate opening and closing positions 14
7.4 - Checking the gate’s movement 14
7.5 - Incorporated radio receiver 14
7.6 - Programming the functions 14
7.6.1 - Level 1 functions (ON-OFF functions) 14
7.6.2 - Programming the Level 1 functions (ON-OFF functions) 15
7.6.3 - Level 2 functions (adjustable parameters) 15
7.6.4 - Programming the Level 2 functions (ON-OFF functions) 15
7.7 - Transmitter memorisation 16
7.7.1 - Mode 1 transmitter memorisation 16
7.7.2 - Mode 1 memorisation procedure 16
7.7.3 - Mode 2 transmitter memorisation 16
7.7.4 - Mode 2 memorisation procedure 16
7.8 -
Transmitter memorisation near the control unit
16
7.9 - Deleting all memorised transmitters from the memory 17
7.10 - Locking / unlocking of the radio memory 17
8 - FURTHER DETAILS
8.1 - Adding or removing devices 18
8.2 - Buffer battery 19
8.3 - Connecting the Oview programmer 19
8.4 - Full deletion of the memory 20
8.5 - Special functions 20
8.6 - Power for external devices 20
9 - DIAGNOSTICS
9.1 - Warning light signals and courtesy light 20
9.2 - Signals of LEDs on the control unit 21
10 - TROUBLESHOOTING 22
11 - PRODUCT DISPOSAL 22
12 - MAINTENANCE 22
13 - TECHNICAL SPECIFICATIONS 21
EC DECLARATION OF CONFORMITY 24
User manual (end user version) 25
To Next Page
Loading...
Need help?
General
