Chapter 15 — Edit List | Adjust Section 145
Paint & Fill Mask Section
The “Paint & Fill Mask” section controls the effect made by a selection brush, selection gradient, or the fill
and remove tools.
The effect of the “Paint & Fill Mask” section is considered in combination with the other types of selective
control provided within an adjust step. The effect of the “Paint & Fill Mask” section is applied on top of both
the Base Mask slider and selection control points. Selections made with the selection brush, selection
gradient, and fill and remove tools will be made to the current step, regardless of the selection made in the
Base Mask slider and by selection control points.
To remove the effect of a brush, selection gradient, or the fill and remove tools, click on the delete button
next to the “Paint & Fill Mask” section.
Feather
The Feather slider enables you to soften the edges of selections made by the selection brush, lasso, or
marquee tools.
Move the Feather slider to the right to increase the amount of softening that is applied to the edges of
the selection.
w Adjust & Filter pull-down menu
An adjustments and filters pull-down menu is displayed for
any step that was created by selecting an enhancement
from either the Adjust or Filter menus, or by selecting the
New Step button.
You can use the adjustments and filters pull-down menu to
gain access to any of the enhancements that are available
within the Adjust or Filter menus.
Additionally, you can use this pull-down menu to perform a
swap enhancement function, which is discussed later in this
chapter.
e Link Icon
A link icon indicates whether the current step contains
linked enhancements. Please see the “Linking
Enhancements” section later in this chapter for more
information on linked enhancements.
r Enhancement Controls
Controls for the enhancement added to an adjustment step are displayed within the Edit List palette,
within that adjustment step. Use the provided controls to adjust the effect of the enhancement, or use the
reset button to revert the enhancement’s controls or delete button to remove the enhancement.
To Next Page
Loading...
Need help?
General
