105
Basic Camera Setup: The Setup Menu
Shooting, Playback, and Setup Menus
g Vibration Reduction
Vibration reduction effectively corrects blur, caused by slight hand movement
known as camera shake, that commonly occurs when shooting with zoom applied
or at slow shutter speeds. Vibration reduction can be used in all shooting modes.
Set Vibration reduction to Off when using a tripod to stabilize the camera
during shooting.
When vibration reduction is enabled, the current setting is displayed during
shooting (when Off is selected, an icon for the current setting is not displayed)
(A 6).
B Notes on Vibration Reduction
• Vibration reduction may take a few seconds to activate after the power is turned on, or the camera
enters shooting mode from playback mode. Wait until the display stabilizes before shooting.
• Due to characteristics of the vibration reduction function, images displayed in the camera’s
monitor immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
• VR stands for vibration reduction.
h AF Assist
Enable or disable AF-assist illumination.
On (default setting)
Vibration reduction is enabled when taking pictures and recording movies. Camera
detects and factors out panning movements when reducing camera shake. When
camera is panned horizontally, for example, vibration reduction reduces only
vertical shake. If camera is panned vertically, vibration reduction affects only
horizontal shake.
Off
Vibration reduction is not enabled.
Auto (default setting)
AF-assist illumination will be used to assist the focus operation when the subject is
poorly lit. Note that for some scene modes, AF-assist illumination turns off
automatically.
Off
Disable this function. The camera may be unable to focus if lighting is poor.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
