16
First Steps
Charging the Battery Using the AC Adapter (COOLPIX S52c)
If you are using the COOLPIX S52c, insert a Rechargeable Li-ion Battery EN-EL8
(supplied) into the camera and charge the battery by connecting the AC Adapter
EH-63 (supplied) before the first use or when the battery is running low.
1 Connect the power cable and AC adapter 1.
2 Turn off the camera.
If the power-on lamp (green) is lit, press the power switch
to turn off the camera. You cannot charge the battery
while the camera is turned on.
3 Connect the AC adapter to the camera’s multi connector 2.
The multi connector should be fully inserted.
4 Plug the power cable into an outlet 3.
The AC adapter power-on lamp will light 4.
C Charging the Battery After Setting the Camera’s Clock
When the camera’s built-in clock has not been set, the battery begins charging when the AC
adapter is connected. Once the clock is set, Picture Bank will start when the AC adapter is
connected, and the camera will attempt to upload pictures to the my Picturetown server. Press
k to cancel picture upload and charge the battery. Picture Bank can be set so that it does not
start automatically when the AC adapter is connected. See the Wireless LAN Connection Guide
for more information on Picture Bank.
3
1
2
4
To Next Page
Loading...
Need help?
General
Weight and Dimensions
