117
Technical Notes
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
For Users of the COOLPIX S52c
See the Wireless LAN Connection Guide for error messages that may be displayed
with use of the wireless LAN feature.
Display Problem Solution A
O (blinks) Clock not set. Set clock. 100
B Battery running low. Prepare to charge or
change battery.
12, 16
N
Warning!
Battery
exhausted.
Battery exhausted. Charge or change battery. 12, 16
Q (● blinks red) Camera cannot focus. • Refocus.
• Use focus lock.
26, 27
27
P
Warning!!
Please wait for the
camera to finish
recording.
O
Camera cannot perform
other operations until
recording is complete.
Wait until message clears
from display automatically
when recording is
complete.
27
N
Memory card is write
protected.
Write-protect switch is in
“lock” position.
Slide write-protect to
“write” position.
21
N
No card present.
Pictmotion mode selected
when no memory card is
inserted.
Insert memory card. 20
P
This card cannot be
used.
Error accessing memory
card.
• Use approved card.
• Check that connectors
are clean.
• Confirm that memory
card is correctly inserted.
112
20
20
P
Warning!
This card cannot be
read.
P
Card is not formatted.
Format card?
No
Yes
Memory card has not been
formatted for use in this
camera.
Choose Yes and press k
to format card, or turn
camera off and replace
card.
21
To Next Page
Loading...
Need help?
General
Weight and Dimensions
