12
First Steps
First Steps
Charging the Battery Using the Battery Charger (COOLPIX S52)
The camera uses a Rechargeable Li-ion Battery EN-EL8 (supplied).
Charge the battery using the Battery Charger MH-62 (supplied) before first use or
when the battery is running low.
• If you are using the COOLPIX S52c, the Battery Charger MH-62 is not supplied
with the camera. Insert the battery into the camera and charge it by connecting
the AC adapter. Proceed to “Inserting the Battery into the Camera” (A 14) and
“Charging the Battery Using the AC Adapter (COOLPIX S52c)” (A 16).
1 Connect the power cable
Connect the power cable to the battery charger 1 and insert the wall plug into a power
outlet 2. The CHARGE lamp will light to show that the charger is on 3.
2 Charge the battery
Insert the battery into the battery charger. Slide
the battery forward 1 and then press down
until it locks into place 2.
CHARGE lamp starts blinking 3 when
battery is inserted. Charging is complete
when lamp stops blinking 4.
About two hours are required to charge a
fully exhausted battery.
3
1
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
