120
Picture Editing
Editing Pictures
e Softening Skin Tones: Skin Softening
The camera recognizes faces in pictures and creates a copy with softer facial skin
tones. Copies created using the skin softening function are stored as separate files.
If no faces are recognized in the picture, an alert is displayed and the camera
returns to full-frame playback mode.
1 Select a degree of softening and tap
Z.
The confirmation dialog is displayed and the
portion of the picture containing the softened
face is enlarged.
2 Check the preview of the copy.
Skin tones in up to 12 faces, in the order of that
closest to the center of the frame, are softened.
When more than one softened face is displayed,
tap E or F to display other faces.
Tap D to adjust the degree of softening. The
monitor display returns to that shown in step 1.
When Z is tapped, a new, edited copy is created.
Copies created with the skin softening function can be recognized by the g icon
displayed in playback mode when photo information is on (A 13).
B Note on Skin Softening
The skin softening function may not perform as expected, even when faces were recognized with
shooting. The camera’s ability to accurately detect faces in pictures and then edit those faces
depends on a variety of factors, including the brightness of the faces in the picture and the direction
in which the faces are looking.
D More Information
See “Image/Sound File and Folder Names” (A 159) for more information.
Tap i in playback mode to edit a picture.
Skin softening
Preview
To Next Page
Loading...
Need help?
General
Weight and Dimensions
