68
Adjusting the Camera Settings in Shooting Mode
More on Shooting
V Continuous
Enable continuous shooting or BSS (best shot selector). The flash is disabled when
Continuous, BSS or Multi-shot 16 is selected, and focus, exposure and white
balance are fixed at the values determined with the first picture in each series.
The following options are available.
B Notes on Continuous Shooting
• The maximum frame rate with continuous shooting may vary depending upon the current image
mode setting, the memory card used, or shooting condition.
• There may be functions with which this setting cannot be enabled. See “Camera Settings That
cannot be Applied Simultaneously” (A 75) for more information.
U Single (default setting)
One picture is taken each time the shutter-release is released.
V Continuous
While the shutter-release button is held down, up to 6 pictures are taken at a rate of
about 1 frame per second (fps) when Image mode is set to f 16:9 (3968).
D BSS (Best Shot Selector)
The “best shot selector” is recommended when shooting with the flash off or the
camera zoomed in, or in other situations in which inadvertent motion can result in
blurred pictures. When BSS is on, the camera takes up to ten pictures while the
shutter-release button is held down. The sharpest picture in the series is
automatically selected and saved.
W Multi-shot 16
Each time the shutter-release button is pressed, camera takes
16 pictures at about 7 frames per second (fps) and arranges
them in a single image.
• Pictures are recorded at an image mode setting of d
Normal (2592). This setting cannot be changed.
• Digital zoom is not available.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
