108
Playback Options: The Playback Menu
Shooting, Playback, and Setup Menus
z Slide Show
Play back pictures stored in the internal memory or
on a memory card in an automated “slide show”.
1 Display the slide show menu; use the
rotary multi selector to choose [Start]
and press d.
To change the interval between pictures, choose
[Frame intvl], select the desired interval time, and
press d before choosing [Start].
To repeat the slide show automatically, enable [Loop]
and press d before choosing [Start]. y will be added to the loop option when
enabled.
2 The slide show begins.
While the slide show is in progress, the following
operations can be performed:
• Use the rotary multi selector to switch pictures.
Continue rotating in either direction to fast forward
(clockwise) or rewind (counterclockwise).
• Press d to pause the slide show.
The menu shown at right is displayed when the slide
show ends or is paused. Choose [Restart] and press
d to play the slide show again, or choose [End] to
stop the slide show and return to the playback menu.
j Notes on Slide Show
• Only the first frame of movies (c 74) included in slide shows is displayed.
• Even if [Loop] is selected, the monitor will turn off automatically if no operations are per-
formed for 30 minutes. The camera will turn off automatically if no operations are per-
formed for another three minutes.
Slide show
Exit
Loop
Frame intvl
Start
Pause
Slide show
Exit
Loop
Frame intvl
Start
Pause
Restart
End
Pause
To Next Page
Loading...
Need help?
General
