250
U
To begin formatting, choose a memory card slot and select Ye s .
Note that formatting permanently deletes all pictures and other
data on the card in the selected slot.
Before formatting, be sure to
make backup copies as required.
Adjust the brightness of the monitor for playback, menus, and the information
display.
Format Memory Card
G button ➜ B setup menu
D During Formatting
Do not turn the camera off or remove memory cards during formatting.
A Two-Button Format
Memory cards can also be formatted by pressing the O (Q) and Z (Q) buttons for more
than two seconds (0 31).
Monitor Brightness
G button ➜ B setup menu
Option Description
Auto
When the monitor is on, monitor brightness is automatically adjusted according to
ambient lighting conditions. Care should be taken not to cover the ambient
brightness sensor (0 4).
Manual
Press 1 or 3 to choose monitor brightness.
Choose higher values for increased
brightness, lower values for reduced brightness.
A See Also
For information on adjusting monitor brightness in live view, see page 53.
To Next Page
Loading...
