Nikon D80 VBA14001 User Manual

- Ａ  ･ -
Q0340グラフィック用ロゴ
060411デザイン部伊藤
VBA14001-R.3694.A
J0
J
J
(J18037-2)
(J18409)
(J18389)
Device:
1.Main mirror 45° inspection and adjustment
2.Sub-mirror 59° inspection and adjustment
Angle inspection and adjustment of Main mirror and sub-mirror
①
Collimator (J19110)
②
Reection mirror (J18389)
③
Optical parallel (J18037-2)
④
Hexagonal wrench
Main mirror
Eccentric pin for
the main mirror
Collimator
Bayonet
①
Collimator (J19110)
②
59° mirror tool (J18409)
③
Hexagonal wrench
Sub-mirror
Eccentric pin for
the sub-mirror
Collimator
Bayonet
Standard:
Main mirror Sub-mirror
Left-right
deviation
± 25’
＿＿
Up-down
deviation
± 10’ +5 ± 5’
Distortion
8’or less 8’or less
Up-down
Left-right
Reference line
Width of line indicates deviation
Caution:
・
Before and after the adjustment, check the accuracy by moving the main mirror up- and downwards a few
times.
・
Check for the up-down deviation. In case the result is out of standard, make an adjustment by turning the
eccentric pin with Hexagonal wrench.
・
In case the the result of checking up-downward and right-leftward deviation is out of standard, the front plate
area or mirror unit should be defective.
・
In case inspection and adjustment are made only with the front body, check again after assembling the front
body into the rear body.

Nikon D80 VBA14001 Specifications

General

Brand	Nikon
Model	D80 VBA14001
Category	Digital Camera
Language	English