- Ａ ･ -
Q0340グラフィック用ロゴ
060411デザイン部伊藤
VBA14001-R.3694.A
Shooting Image Adjustment
1. Summary
When D80 shooting image-related and listed parts on Page A53 are replaced, be sure to make an adjustment
by the shooting image adjustment software for D80 (J65091). The details of its function and how to use this
software are as follows:
2. Adjustment software function
(1) Gr/Gb difference compensation adjustment (G lter)
(2) "Sensitivity" adjustment
(3) Shading adjustment
(4) Gr/Gb compensation adjustment (R/B lter) / Line crawl adjustment
(5) "Sensitivity ratio" adjustment
(6) Image shutter inspection and adjustment
(7) Pixel defect compensation - black point
(8) Pixel defect compensation - white point
(9) Getting reference values
(10) Factory default setting
(11) Checking of the adjustment value
(12) Reading of RISC version
(13) TFT adjustment
※ When the adjustments from (1) to (5) are made, get in advance the reference values of (9) by using the
reference body, then perform the adjustments.
3. Hardware requirements
OS： Windows2000, WindowsXP
Japanese or English OS
PC： CPU Pentium Ⅱ or more
Memory 256MB or more
USB1.1 or 2.0
Screen size: 1024×768 pixels or more
4. How to set up
Create any directory in the harddisc (except desk top) of PC, and copy the following les.
・D80IMG.exe・・・・・・・・・Application le
・D80STD.DAT ・・・・・・・・ Standard le
・NkdPTP.dll・・・・・・・・・USB-communication application extension le for WinXP
・NkdPTPDi.dll・・・・・・・・USB-communication application extension le for Win98SE and Win2000
・CCDFLG.DAT・・・・・・・・・Fixed value data (writing of xed values）
・CCDINIT.DAT ・・・・・・・・Initial value data (factory default setting)
・TFTFLG.DAT ・・・・・・・・Fixed value data
・TFTINIT.DAT ・・・・・・・・Initial value data (factory default setting)
・ShadingFittingQ340DLL.dll ・For line crawl, shading
・ShadingFittingQ340_GLC.ini・System initialization le for line crawl
・ShadingFittingQ340_SD.ini・ System initialization le for shading
※ Be sure to copy the above le in the same directory.
To Next Page
Need help?
General
