Nikon D80 VBA14001 User Manual

- Ａ 0 ･ -
Q0340グラフィック用ロゴ
060411デザイン部伊藤
VBA14001-R.3694.A
①
AE CCD alignment inspection and adjustment (ref. Page A39,A40 for details
）
《
USB connection communication
》
②
AE accuracy inspection and adjustment
《
USB connection communication
》
③
Aperture accuracy inspection
《
USB connection communication
》
④
M1/4000 Accuracy inspection and adjustment
《
RS232C connection communication
》
⑤
Adjustment for battery check level (Use the battery tool (J61213) and stabilized power supply.
）
《
RS232C connection communication
》
⑥
Built-in SB ash inspection and adjustment
《
USB connection communication
》
〔Tools required〕ref. Page A44.
・
Battery check voltage level adjustment
Connect the battery tool (J61213) to the camera, and turn the communication change-SW to ON. Then make
adjustment.
・
Built-in SB ash inspection and adjustment
Set the distance between camera and ash meter to 1 m, and inspect and adjust the light volume of the built-in
SB. (ref. adjustment software for details)
・
AE accuracy inspection and adjustment
When AE accuracy inspection and adjustment is made,
Two types of lenses (AF50/1.4D and AF28/2.8D) are used.
Caution:
AE accuracy is not inspected by using the exposure value of the traditional shutter tester. The metering value
is displayed on PC screen.
AE inspection and adjustment
AF inspection and adjustment
Note: When using the adjustment software for the rst time, prepare three cameras of D80 and measure by
"WRITING of AF ADJ. LENS OFFSET VALUE" on the main menu.
《
USB connection communication
》
①
AF accuracy adjustment (Make the overall following adjustment.)
②
YAW, PITCH inspection and adjustment
③
LARK adjustment (inc.
CCD output adjustment)
④ AF shift adjustment
〔Tools required〕
1. When adjusting for all adjustment items
ref. Page A44.
2. When inspecting AF accuracy
① AF
adjustment lens (J18266)
②
AF adjusting tool (J15259
）
③
Lens holder for F4 (J15280)
④
AF chart
（J18344）
⑤
Chart illuminator for AF
（J15264）
3. When adjusting YAW, PITCH
YAW, PITCH tool
（
J18230
）
4. When adjusting LARK
The above tool when inspecting AF accuracy
In "AF shift adjustment", the distance from the bayonet reference plane to the imaging area (CCD) is calculated
by the actual shot photo, and its error is recorded in EEPROM as compensation amount, and adjusted.

Nikon D80 VBA14001 Specifications

General

Brand	Nikon
Model	D80 VBA14001
Category	Digital Camera
Language	English