[ 101 ]
Menu functions
• VOICE DIALING
You can dial up to 10 stored numbers in your phone book using the voice
dialing feature. Before you can place a call using voice dialing, you must
first assign a voice ‘tag’ to the number.
Note: Your phone must be on to use this function. Do not switch
on the phone when wireless phone use is prohibited or when it
may cause interference or danger.
Assigning a voice tag to a phone number
You can create a voice tag (such as a person’s name) for up to 10 phone
book entries, then dial the number using the voice dialing feature. See “Dial
a number using voice dialing” on page 101 for more information. It is
easier for the phone to differentiate between long, unique voice tags. For
example, you might want to record a person’s first and last names rather
than only the first name.
ASSIGNING A VOICE TAG TO AN ENTRY
1 At the Start screen, scroll to the name you want to give a voice tag.
2 Press Details, then Options, and scroll to Add voice tag.
3 Press Select. The phone displays Press Start, then speak after tone.
4 Press Start.
You hear several beeps, and Please speak now appears.
5 Speak clearly into the microphone.
Note: Do not press Quit unless you want to cancel the recording.
The phone automatically stops recording and then saves and replays the
voice tag.
If recording is not successful, your phone displays Voice system error.
Press Options, scroll to Add voice tag, and repeat Steps 3-5.
DIAL A NUMBER USING VOICE DIALING
Before using voice dialing, note that:
To Next Page
Loading...
Need help?
General
