RADIUS Attributes Reference
10
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
• An unsupported attribute that is present in a CoA message is silently ignored,
unless explicitly stated differently in the attribute description.
All Nokia Vendor Specific Attributes (VSAs) are available in a freeradius dictionary
format. The dictionary is delivered together with the software package:
<cflash>\support\dictionary-freeradius.txt.
2.1.1 Audience
This guide is intended for network administrators who are responsible for configuring
and operating the 7750 SR OS using RADIUS AAA. It is assumed that the network
administrators have an understanding of networking principles and configuration,
routing processes, protocols and standards.
2.2 RADIUS Authentication Attributes
2.2.1 Subscriber Host Identification
Attributes related to subscriber-host configuration included in RADIUS authentication
request and response.
Table 2 Subscriber Host Identification (Description)
Attribute ID Attribute Name Description
1 User-Name Refers to the user to be authenticated in the Access-Request. The format
for IPoE/PPPoE hosts depends on configuration parameters pppoe-
access-method, ppp-user-name or user-name-format in the CLI
context configure subscriber-mgmt authentication-policy name. The
format for ARP-hosts is not configurable and always the host IPv4-
address.The RADIUS User-Name specified in an Access-Accept or CoA
is reflected in the corresponding accounting messages. The attribute is
included in accounting via configure subscriber-mgmt radius-
accounting-policy name include-radius-attribute user-name.
To Next Page
Loading...
Need help?
General
