RADIUS Attributes Reference
60
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
Note:
1. Can be included as (part of) CoA key to identify one or multiple subscriber host(s) or session(s).
See Subscriber Host Identification section for details.
2.2.2 Wholesale-Retail — Local Access Mode
26-6527-202 Alc-Dhcp6-Renew-Time 0 0-1 0
26-6527-203 Alc-Dhcp6-Rebind-Time 0 0-1 0
26-6527-217 Alc-UPnP-Sub-Override-Policy 0 0-1 0-1
26-6527-228 Alc-Trigger-Acct-Interim 0 0 0-1
26-6527-232 Alc-Acct-Interim-IvI 0 0+ 0+
26-6527-234 Alc-DNAT-Override 0 0+ 0+
26-6527-242 Alc-Radius-Py 0+ 0+ 0+
Table 4 Subscriber Host Identification (Applicability) (Continued)
Attribute ID Attribute Name Access
Request
Access
Accept
CoA Request
Table 5 Wholesale-Retail: Local Access Mode (Description)
Attribute ID Attribute Name Description
2 6 -6 527 - 17 A lc - R e ta i l -S erv - I d T he s e r vic e ID of the retailer to which this subscriber host belongs.
(configure service ies | vprn retail-service-id subscriber-interface
retail-interface-name fwd-service wholesale-service-id fwd-
subscriber-interface wholesale-interface-name). Returning an IES
service ID for an IPoEv4 host is treated as a session setup failure.
This attribute must be included together with NAS-Port-Id and an IP-
address/prefix attribute in a CoA targeting a subscriber host in a retail
service.
26-6527-31 Alc-MSAP-Serv-Id The service ID where Managed SAPs are created. (configure service
ies/vprn service-id). If this attribute is omitted, use msap defaults
created under ludb or capture VPLS. (configure subscriber-mgmt
local-user-db local-user-db-name ppp/ipoe host msap-defaults
service service-id or configure service vpls service-id sap sap-id
msap-defaults service service-id). This omitted attribute without
explicit created msap-defaults is treated as a setup failure.
To Next Page
Loading...
Need help?
General
