RADIUS Attributes Reference
272
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
2.4.6 Overview of CoA Attributes
Table 91 provides an overview of all attributes that are supported in a RADIUS
Change of Authorization (CoA) message. For attribute details, refer to the other
sections in this document.
Table 90 CoA and Disconnect Message: Data Triggered Dynamic Services
Identification Attributes
Attribute
ID
Attribute Name Identifies
44 Acct-Session-Id Accounting session id of a dynamic services data
trigger (can be displayed with "show service
dynamic-services data-triggers [sap sap-id]"):
• Identifies a single dynamic service.
• Modify and Teardown actions are supported in
CoA.
• Only a single dynamic service is deleted with a
Disconnect Message.
Accounting session id of a dynamic services sap
associated with a dynamic services data trigger (can be
displayed with "show service dynamic-services
saps summary [sap sap-id]"):
• Identifies a single dynamic service.
• Modify and Teardown actions are supported in
CoA.
• The identified dynamic service is deleted with a
Disconnect Message.
87 NAS-Port-Id Targets a dynamic services sap-id:
• Identifies a single dynamic service.
• Modify and Teardown actions are supported in
CoA.
• The identified dynamic service is deleted with a
Disconnect Message.
Note: If the sap-id corresponds with the sap-id of a
dynamic services data trigger, then all dynamic data
services associated with that data trigger will be
deleted in case of a Teardown action in CoA or a
Disconnect Message.