RADIUS Attributes Reference
106
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
2.2.10 WLAN Gateway
In this section, WLAN gateway application specific attributes are detailed, including
generic Enhanced Subscriber Management (ESM) attributes that have different
semantics when used in WLAN gateway scenarios. Relevant attributes for GTP
uplink are documented in a separate GTP uplink section.
26-10415-3 3GPP-PDP-Type 0 0-1 0 0
26-10415-5 3GPP-GPRS-Negotiated-QoS-
Profile
00-100
26-10415-7 3GPP-GGSN-Address 0 0-1 0 0
26-10415-13 3GPP-Charging-Characteristics 0 0-1 0 0
26-10415-20 3GPP-IMEISV 0 0-1 0 0
26-10415-21 3GPP-RAT-Type 0 0-1 0 0
26-10415-22 3GPP-User-Location-Info 0 0-1 0 0
Table 30 GTP Uplink (Applicability) (Continued)
Attribute ID Attribute Name Access
Request
Access
Accept
CoA
Request
Acct.
Messages
Table 31 WLAN Gateway (Description)
Attribute ID Attribute Name Description
4 NAS-IP-Address The identifying IP Address of the NAS requesting Authentication or
Accounting. Authentication generated from ISA (for a UE in migrant
state) can be configured to use local IP address of RADIUS client on the
ISA or the system IP address (on CPM).
config aaa isa-radius-policy name nas-ip-address-origin {isa-ip |
system-ip}
When an ESM host exists for the UE (UE is in authenticated state), then
the NAS IP in authentication and accounting is the system IP address.
To Next Page
Loading...
Need help?
General
