RADIUS Attributes Reference
100
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
2.2.8 Subscriber Services
26-6527-98 Alc-Force-Nak 0 0 0-1
Table 24 Subscriber Host Creation (Applicability) (Continued)
Attribute ID Attribute Name Access
Request
Access
Accept
CoA
Request
Table 25 Subscriber Services (Description)
Attribute ID Attribute Name Description
26-6527-151 Alc-Sub-Serv-
Activate
Activate a subscriber service. The attribute typically contains
parameters as input for the Python script that populates the subscriber
service data structure (sub_svc). The attribute is ignored if not used in
Python.
The parameters can cross an attribute boundary. The concatenation of
all Alc-Sub-Serv-Activate attributes with the same tag in a single
message is typically used as a unique subscriber service instance
identifier (key).
In subscriber service RADIUS accounting messages, the attribute is
sent untagged and contains the subscriber service data structure
sub_svc.name value used at service activation. Multiple attributes may
be present if the total length does not fit a single attribute.
26-6527-152 Alc-Sub-Serv-
Deactivate
Deactivate a subscriber service. The attribute typically contains
parameters as input for the Python script that populates the subscriber
service data structure (sub_svc). The attribute is ignored if not used in
Python.
The parameters can cross an attribute boundary. The concatenation of
all Alc-Sub-Serv-Deactivate attributes with the same tag in a single
message is typically used as the unique subscriber service instance
identifier (key).
26-6527-153 Alc-Sub-Serv-Acct-
Stats-Type
Enable or disable subscriber service accounting and specify the stats
type: volume and time or time only. The attribute is used as input for the
Python script that populates the subscriber service data structure
(sub_svc.acct_stats_type). The attribute is ignored if not used in
Python.
The subscriber service accounting statistics type cannot be changed for
an active subscriber service.