RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 259
2.3.8 CLI User Access Accounting
26-3561-2 Agent-Remote-Id 0-1 0-1 0-1
26-6527-165 Alc-Dyn-Serv-Script-Params 1+ 1+ 1+
Table 80 Dynamic Data Service Accounting (Applicability) (Continued)
Attribute ID Attribute Name Acct Start Acct Stop Acct Interim-Update
Table 81 CLI User Access Accounting (Description)
Attribute ID Attribute Name Description
1 User-Name The name of user requesting user-Authentication, Authorization,
Accounting. User-names longer the allowed maximum Limit are treated
as an authentication failure.
4 NAS-IP-Address The identifying IP Address of the NAS requesting the Authentication or
Accounting. Included when the RADIUS server is reachable via IPv4.
The address is determined by the routing instance through which the
RADIUS server can be reached:
“Management” — The active IPv4 address in the Boot Options File (bof
address ipv4-address)
“Base” — The IPv4 address of the system interface (configure router
interface system address address). The address can be overwritten
with the configured source-address (configure system security
source-address application radius ip-int-name | ip-address)
31 Calling-Station-Id The IP address (coded in hex) from the user that requests
Authentication, Authorization, Accounting.
44 Acct-Session-Id A unique number generated per authenticated user and reported in all
accounting messages. Used to correlate CLI commands (accounting
data) from the same user.
61 NAS-Port-Type Mandatory included as type Virtual(5).
To Next Page
Loading...
Need help?
General
