RADIUS Attributes Reference
102
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
2.2.9 GTP uplink
In this section, GTP uplink application specific attributes are detailed. These
attributes are applicable to WLAN Gateway as well as ESM scenarios such as Hybrid
Access.
Table 27 Subscriber Services (Applicability)
Attribute ID Attribute Name Access
Request
Access
Accept
CoA
Request
Tag Max. Tag
26-6527-151 Alc-Sub-Serv-Activate 0 0+ 0+ Y 0-31
(untagged)
26-6527-152 Alc-Sub-Serv-Deactivate 0 0+ 0+ Y 0-31
26-6527-153 Alc-Sub-Serv-Acct-Stats-
Type
0 0+0+Y 0-31
26-6527-154 Alc-Sub-Serv-Acct-Interim-Ivl 0 0+ 0+ Y 0-31
Table 28 GTP Uplink (Description)
Attribute ID Attribute Name Description
26-6527-145 Alc-MGW-Interface-
Type
This contains the interface type that will be used to determine the
type of GTP-C connection, overrides local configuration.
26-6527-146 Alc-Wlan-APN-Name Specifies the Access Point Name (APN) for which a GTP-C
session will be set up. This will be signaled in the GTP-C setup and
may be used to determine the IP address of the GGSN/P-GW by
performing a DNS query if the [26-10415-5] 3GPP-GGSN-Address
attribute is not present. This overrides a locally configured APN.
26-6527-147 Alc-Mslsdn Contains the MSISDN (telephone number) of the UE, and will be
included in GTP-C signaling. When not present the corresponding
GTP-C Information Element will not be sent.
26-6527-179 Alc-GTP-Local-
Breakout
Specifies if part of the UE traffic is allowed to be locally broken out
(such as, NATed and routed), subject to matching an ipv4filter
entry with action gtp-local-breakout, associated with the UE.
26-6527-205 Alc-GTP-Default-
Bearer-Id
When establishing a GTP connection for a UE, this specifies the
bearer id (GTPv2) or NSAPI (GTPv1) that will be used for the data
path connection. If not provided, a default value of 5 will be used.
To Next Page
Loading...
Need help?
General
