RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 163
2.3 RADIUS Accounting Attributes
2.3.1 Enhanced Subscriber Management (ESM)
Accounting
There are currently three accounting modes in Enhanced Subscriber Management
accounting:
• Host accounting (H)
• Session accounting (S)
• Queue instance accounting (Q)
A single host can have up to two simultaneously active accounting modes.
The Acct Reporting Level column in Table 64 shows the accounting mode messages
that report the attribute:
• HSQ means the attribute is present in the accounting messages of all
accounting modes
• H->S->Q means the attribute is present in the accounting messages of a single
accounting mode:
− If Host accounting is enabled, then the attribute is present in the accounting
messages that belong to this mode.
− Else if session accounting is enabled, then the attribute is present in the
accounting messages that belong to this mode.
− Else if Queue instance accounting is enabled, then the attribute is present
in the accounting messages that belong to this mode.
Each accounting mode has a dedicated accounting session id. The accounting
session id (number format) has a fixed length format of 22 bytes and is unique.
Host accounting (per subscriber host):
show service id <svc-id> subscriber-hosts detail
Acct-Session-Id : 241AFF000000204FE9D801
Session accounting (per PPPoE or IPoE session):
show service id <svc-id> ppp session detail
show service id <svc-id> ipoe session detail
Acct-Session-Id : 241AFF000000214FE9D801
To Next Page
Loading...
Need help?
General
