Using the Web manager
1
1. Using the Web manager
The
Getting Started
guide explained how to
perform initial configuration by putting the
Nokia A032 into Learn mode.
Now you can access
all
of the Nokia A032’s
setup pages from any station (wired or
wireless), using a standard browser interface,
while the Nokia A032 is in Normal mode.
This is the easiest way of configuring your
Nokia A032. The other methods available are
described in
Command line interface
on
page 67,
Using TFTP
on page 103 and
Appendix G – Upgrading
.
The browser interface also provides
comprehensive status monitoring capabilities.
•
Displaying the Access Point home page
,
below, explains how to access the browser-
based setup and configuration pages.
•
Status monitoring
on page 5 explains how
to monitor wireless link statistics, modem
and LAN activity, for example, using the
browser interface.
•
Web-based setup
on page 32 gives a
detailed description of every parameter
available for customizing the A032.
In some cases, you can
only configure the
Nokia A032 from a
nominated station.
See Management
security options on
page 45.
A032-Adv.book Page 1 Monday, November 13, 2000 10:47 AM
To Next Page
Loading...
Need help?
General
