Nokia A032 User Manual

Command line interface
67
2. Command line interface
The command line manager (CLM) gives you
complete control over the Nokia A032 via a
text-based interface.
This chapter
• explains how to access the CLM
• explains how to configure the Nokia A032
using the
set command
• lists all the commands available from the
CLM.
Accessing the command line manager (CLM)
The Web browser-based interface described in
the previous chapter is the normal method by
which you customize your Nokia A032.
However, there are times when the methods
described in this chapter are more appropriate.
In particular, the CLM is the only method
supported via the serial port.
Your Nokia A032 has a command line
interface, which you can access in one of two
ways:
• Using a PC terminal attached to the serial
port via a null-modem cable
• Using a Telnet session on a wired or
wireless LAN attached station.
Throughout this
chapter, the command
line manager is
referred to as the CLM
for brevity.
Important!! You need
a null-modem cable if
you want to
communicate via the
serial port.
A032-Adv.book Page 67 Monday, November 13, 2000 10:47 AM

Nokia A032 Specifications

General

Brand	Nokia
Model	A032
Category	Wireless Access Point
Language	English