Nokia A032 User Manual

90
Nokia A032 Advanced User Guide
CLM commands
This section gives a complete listing of the CLM
commands available on the Nokia A032. For an
explanation of how to access the CLM, see
page 67.
The basic command syntax is:
command parameter1 value
The format of value depends on the parameter
you’re changing. Some values are simple
numbers, some are strings and some are special
values such as IP addresses.
The command and parameters are separated by
spaces.
• You can correct typing errors using the
backspace key.
• You can terminate commands and return to
the command prompt by pressing
Ctrl-C.
• You can repeat the previous command by
pressing the space bar at the command
prompt.
Help on commands
• To see a summary of commands, type:
help (or ?)
• To get help on a specific command, type:
help command (or ? command)
For example:
help ping
• To see a list of parameters for the set
command, type:
set help (or set ?)
A032-Adv.book Page 90 Monday, November 13, 2000 10:47 AM

Nokia A032 Specifications

General

Brand	Nokia
Model	A032
Category	Wireless Access Point
Language	English