User Guide Accessing the WebUI
3TG-02285-AAAA-TCZZA-02 © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
33
Accessing the WebUI
This section describes:
• how to establish a connection from the device on which you will access the
WebUI for the FastMile 5G Receiver
• how to log into the WebUI
Make sure that your PC, laptop, or tablet has a connection to a gateway that has an
Ethernet LAN connection to a powered-up FastMile 5G Receiver. Ensure the Local
Area Connection setting on your device is configured as “Obtain an IP address
automatically”,
On your device, open a web browser, and enter the IP address that is provided on
the quick onboarding guide, for example:
http://192.168.1.1
The WebUI appears, with its menu on the left side of the screen and the Overview
screen appears on the right side.
The Overview screen is the only screen of the WebUI that can be accessed without
logging in.
Note: The above IP address is the default generic configuration; the IP address for you to
use might differ as per customer-specific configuration. If you cannot access the FastMile
5G Receiver through the above IP address, refer to information available through your
service provider.
To Next Page
Loading...
Need help?
General
