User Guide WebUI screens
3TG-02285-AAAA-TCZZA-02 © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
57
Unlocking a PIN-locked SIM card
From the System/General screen, click Enter PIN.
The “Enter PIN to unlock your SIM” window appears.
Enter the PIN code for your SIM card, and then click Enter PIN. You are allowed three
attempts to correctly enter the PIN code. If you enter an incorrect PIN code three
times, see Unblocking a blocked PIN-locked SIM card to unblock the SIM card.
Unblocking a blocked PIN-locked SIM card
From the System/General screen, click Enter PUK.
The “Enter PUK to unblock your SIM” window appears.
Enter the PUK code for the SIM card, along with a new PIN code (two times), and
then click OK. You are allowed ten attempts to correctly enter the PUK code.
If the PUK code is not correctly entered within ten attempts, the SIM card is disabled,
and you will need to contact your service provider to obtain a new SIM card.
Rebooting the FastMile 5G Receiver
This section describes how to reboot the FastMile 5G Receiver through the WebUI;
to reboot the FastMile 5G Receiver through the reset button, see Rebooting or
resetting the FastMile 5G Receiver.
Note: If the SIM card provided for your FastMile 5G Receiver is a PIN-locked SIM card, the
PIN code for unlocking the SIM card is provided with the SIM card.
Note: If the SIM card provided for your FastMile 5G Receiver is a PIN-locked SIM card and
it is blocked (such as when the SIM PIN code is entered incorrectly three times), the PUK
code needed to unblock it is typically provided on the original plastic packaging of the SIM
card.
To Next Page
Loading...
Need help?
General
