Copyright © 2007 Nokia. All rights reserved.
Camera
17
Image quality — Print 3M - Large (2048x1536
resolution), Print 2M - Med. (1600x1200 resolution),
Print 1.3M - Small (1280x960 resolution), or MMS 0.3M
(640x480 resolution). The higher the resolution, the more
memory the image consumes. If you want to print the
image, select Print 3M - Large, Print 2M - Med., or Print
1.3M - Small. If you want to send it through e-mail, select
Print 1.3M - Small. To send the image through MMS,
select MMS 0.3M.
These resolutions are only available in the main camera.
Add to album — Select whether you want to save the
image to a certain album in Gallery. If you select Yes, a list
of available albums opens. The image is automatically
saved to the selected album after capture. Change the
setting after you finish taking pictures for the selected
album.
Show captured image — Select Yes if you want to see the
captured image after it is taken, or No if you want to
continue taking pictures right away.
Extended zoom (main camera only) — Select On
(continuous) to allow the zoom increments to be smooth
and continuous between digital and extended digital zoom
or On (paused) to allow the zoom increments to pause at
the digital and extended digital step point. If you want to
limit the zoom to where the selected image quality is
maintained, select Off.
Flicker cancellation — Select 50Hz or 60Hz.
Shutter tone — Select the tone you want to hear when
you take a picture.
Memory in use — Select where to store your images.
Take pictures in a sequence
Sequence mode is available only in the main camera.
To set the camera to take up to six pictures in a sequence
(if enough memory available), select Options > Sequence
mode.
To take the pictures, press the capture key.
After you take the pictures, they are shown in a grid on the
display. To view a picture, press to open it.
You can also use the sequence mode with the self-timer.
To return to the sequence mode viewfinder, press the
capture key.
You in the picture — self-timer
The self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
select Options > Self timer > 2 seconds, 10 seconds, or
20 seconds. To activate the self-timer, select Activate.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
