44951501TH Rev.2
5-6
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
5.3 User maintenance menu functions
5.3.1 Maintenance menu (for end-users)
The maintenance menu category is a general menu category (not the system maintenance
menu).
The following is the options available in the maintenance menu:
Maintenance Menu
Default setting in shade area
Category
Operator panel display
Description
Option
(upper display)
Setting
(lower display)
MAINTENANCE
MENU
MENU RESET EXECUTE
Resets the CU EEPROM. This option restores
the USER MENU settings to the factory
defaults. EXECUTE exits this menu when
selected.
SAVE MENU EXECUTE
Stores currently-made menu settings. This
option stores menu settings made when it is
last executed, and overwrites with them those
it stored before that. The option displays the
following confirmation message when the OK
button is pressed:
ARE YOU SURE?
YES/NO
NO restores the previous menu display when
selected. When selected, YES stores the
currently-made menu settings, exiting this
menu.
RESTORE
MENU
EXECUTE
Restores stored menu settings. The option
displays the following confirmation message
when the OK button is pressed:
ARE YOU SURE?
YES/NO
NO restores the previous menu display when
selected. When selected, YES restores the
stored menu settings, exiting this menu.
* The option is not executed while the printer
has print data.
Category
Operator panel display
Description
Option
(upper display)
Setting
(lower display)
MAINTENANCE
MENU
POWER SAVE ENABLE
Sets whether to enable or disable the Power
Save mode. The time to establish the power
saving mode when ENABLE is selected can
be changed with SYS CONFIG MENU-"POW
SAVE TIME".
DISABLE
SLEEP ENABLE
Sets whether to enable or disable the Sleep
mode. The time to establish the mode when
ENABLE is selected can be changed with
SYS CONFIG MENU-"SLEEP TIME".
DISABLE
AUTO PW
OFF
ENABLE
Set the behavior of Auto Power Off.
DISABLE: Invalidate to go Off mode by time.
AUTO CONFIG: The printer does not go to Off
mode when LAN cable is connected, goes to
Off mode when USB is connected.
ENABLE: The printer goes to Off mode even if
LAN cable is connected.
AUTO-
CONFIG
DISABLE
PAPER BLACK
SET
0
Used for fine adjustment when visible faded
black print or a white horizontal dotted line
results on plain paper. Decrease the setting
when such specks or snow flake-like print
occurs in a high-density print area. Increase
the setting when faded print occurs.
+1
+2
-2
-1
PAPER COLOR
SET
0
Used for fine adjustment when visible faded
color print or a white horizontal dotted line
results on plain paper. Decrease the setting
when such specks or snow flake-like print
occurs in a high-density print area. Increase
the setting when faded print occurs.
+1
+2
-2
-1
SMR SETTING -3
-2
-1
Corrects print variations that occur due to
temperature and humidity environment, print
density or print frequency variation. Change
the setting when an uneven print quality
occurs.
0
+1
+2
+3
To Next Page
Loading...
Need help?
General
