Paper recommendations > 13
M
ULTI
PURPOSE
TRAY
The multi purpose tray can handle the same sizes as the cassette tray, but in weights from
75 to 203g/m². For very heavy paper stock use the face up (rear) paper stacker. This
ensures that the paper path through the printer is almost straight.
The multi purpose tray can feed paper widths as small as 100mm and lengths up to
1220mm (banner printing).
For paper lengths exceeding 356mm (Legal 14in.) use paper stock between 90g/m² and
128g/m² and the face up (rear) paper stacker.
Use the multi purpose tray for printing on envelopes. Paper should be loaded print side up
and top edge into the printer.
F
ACE
DOWN
STACKER
The face down stacker on the top of the printer can hold up to 150 sheets of 80g/m²
standard paper, and can handle paper stocks up to 120g/m². Pages printed in reading order
(page 1 first) will be sorted in reading order (last page on top, facing down).
F
ACE
UP
STACKER
The face up stacker at the rear of the printer should be opened and the tray extension
extended when required for use. In this condition paper will exit via this path, regardless
of driver settings.
The face up stacker can hold up to 1 sheet of 80g/m² standard paper, and can handle
stocks up to 203g/m².
Always use this stacker and the multi purpose feeder for paper stocks heavier than
120g/m².
SIZE DIMENSIONS WEIGHT
A6 105 x 148mm
Light: 64-74g/m²
Medium: 75-90g/m²
Heavy: 91-120g/m²
Ultra heavy: 121- 203g/m²
A5 148 x 210mm
B5 182 x 257mm
Executive 184.2 x 266.7mm
A4 210 x 297mm
Letter 215.9 x 279.4mm
Legal 13in. 216 x 330mm
Legal 13.5in. 216 x 343mm
Legal 14in. 216 x 356mm
Custom sizes N/A
COM-9 Envelope N/A
COM-10 Envelope N/A
Monarch Envelope N/A
C5 162 × 229mm
DL 110 x 220mm
Banner 210 x 1220 mm max.
To Next Page
Loading...
Need help?
General
