Menu functions > 28
FX
EMULATION
This menu controls settings effective when the printer is operating in FX emulation mode.
ITEM SETTINGS EXPLANATION
CHARACTER
PITCH
10 CPI;
12 CPI; 17
CPI; 20 CPI;
PROPORTION
AL
Specifies character pitch in this emulation.
CHARACTER
SET
Set 1; Set 2 Specifies a character set.
SYMBOL SET IBM 437
(Default
Symbol Set
only shown)
Specifies a symbol set.
LETTER 0
STYLE
Disable;
Enable
Specifies the style that replaces 9BH with letter o and 9DH with a zero
ZERO
CHARACTER
Normal;
Slashed
Sets the zero to be slashed or unslashed.
LINE PITCH 6 LPI; 8 LPI Specifies the line spacing.
WHITE PAGE
SKIP
OFF / ON Selects whether blank pages are printed or not.
CR FUNCTION CR / CR+LF Selects whether a received carriage return character (0Dh) also causes a
line feed.
LINE LENGTH 80 COLUMN;
136 COLUMN
Specifies the number of characters per line.
FORM LENGTH 11 inch;
11.7 inch;
12 inch
Specifies the length of paper.
TOF
POSITION
0.0 inch -
1.0 inch
Specifies the distance of print from the top edge of the paper.
LEFT MARGIN 0.0 inch -
1.0 inch
Specifies the distance of print from the left hand edge of the paper.
FIT TO
LETTER
Disable;
Enable
Sets the printing mode that can fit print data, equivalent to 11 inches (66
lines), in the LETTER-size printable area.
TEXT HEIGHT Same; Diff Sets the height of a character.
SAME: Regardless of CPI, same height.
DIFF: As CPI, character heights vary.
To Next Page
Loading...
Need help?
General
