Menu functions > 30
M
EMORY
MENU
This menu sets the conditions of memory allocated to the buffer and resource.
Not displayed as default. This menu is displayed only when set to ENABLE in OP MENU
of Administrator menu.
NETWORK
SCALE
NORMAL /
SMALL
Selects network size.
When NORMAL is selected, printer can work effectively, even when
connected to a HUB that has a spanning tree
feature. However, printer start up time gets longer when computers are
connected with two or three small LANs.
When SMALL is selected, computers can cover from two or three small
LANs to a large LAN, but may not work effectively when connected to a
HUB that has a spanning tree feature.
HUB LINK
SETTING
AUTO
NEGOTIATE
100BASE-TX
FULL
100BASE-TX
HALF
10BASE-T
FULL
10BASE-T
HALF
Sets full or half duplex for communication via a network hub.
When AUTO is set, negotiation is done automatically.
FACTORY
DEFAULTS
EXECUTE Reloads the settings present when the unit was setup by the manufacturer.
ITEM SETTINGS EXPLANATION
RECEIVE BUF
SIZE
AUTO
0.5MB
1MB
2MB
4MB
8MB
16MB
32MB
Sets the size of the receive buffer
RESOURCE
SAVE
AUTO
OFF
0.5MB
1MB
2MB
4MB
8MB
16MB
32MB
Sets the size of the resource saving area.
ITEM SETTINGS EXPLANATION
To Next Page
Loading...
Need help?
General
