- 59 -
3. Basic Operations
The QWERTY keyboard set by default can be switched to the AZERTY keyboard. To switch to the AZERTY keyboard,
select [Manage Unit] > [Keyboard Layout] > [AZERTY] on the touch panel.
• Entering Characters
1
Press the touch panel.
2
When the entry is complete, press [OK] or [Next].
To enter a diacritical mark, press and hold a character button with [...] shown. When a diacritical mark appears, press
the character you want to enter.
The screen below shows an image when holding down the "a" button.
• Switching the Entry Mode (Numbers Alphabetic Characters)
1
Press [Alpha] or [Symbol].
[RU] may be shown in case of Russian, and [EL] in case of Greek. In case of other languages, only [Alpha] and
[Symbol] may be shown.
• Switching the Entry Mode (Uppercase Lowercase)
1
Press the button to switch between the uppercase and lowercase characters.
• Deleting an Entered Character
1
Use the (back space) button on the touch panel or the (CLEAR) button
on the operator panel.
The character before the cursor ( ) is deleted.
To delete an entered character, move the cursor to the right of the character. To move the cursor, press [ ],
[ ], [ ], or [ ].
Entering with the Numeric Keypad
You can enter the numbers labeled on each key.
It is impossible to enter the alphabet.
Please enter the alphabet from the touch panel.
5 Return button Puts a line break. This button appears when entering body text of an
E-mail.
6 Left button/right button/up button/down
button
Moves the cursor left, right, up, or down.
7 Capital Lock Switches between the uppercase and lowercase characters.
8 Entry mode button Switches the entry mode (types of characters) for entering text.
Item Description
To Next Page
Loading...
Need help?
General
