To Next Page

To Previous Page

- 149 -

7. Fax

Setting for Receptions

This section describes various settings when receiving a fax.

• Setting the Reception Mode

•DRD

• Setting the Waiting Time from When an Incoming Call Arrives to When Reception Starts

(Response Waiting Time)

[Fax Ready Mode] is set by factory default.

Change the setting according to your environment.

• [Fax Ready Mode] : Select this mode if you use this machine for fax only.

• [Tel/Fax Ready Mode] : Select this mode if you want to receive both phone calls and faxes

with the machine detecting automatically.

• [Ans/Fax Ready Mode] : Select this mode if you want to use the answering phone function

of an external telephone as well as the fax function of the machine.

• [Tel Ready Mode] : Select this mode if you often use the external telephone that is

connected to the machine.

• [DRD] : If you use the distinctive ring detection (DRD) function that is provided by a

telephone company. Refer to "DRD".

Check that the machine is turned on.

Press [Device Settings] at the top of the home screen.

Setting the Reception Mode

Oki MC573 User Manual

Other manuals for Oki MC573