To Next Page

To Previous Page

- 67 -

Conguring the tray cassette

Match the tray cassette to the loaded paper. Refer to the following table and congure paper type and

thickness by using the operator panel.

Complete the settings by pressing the [SETTING] button, and then [TRAY] - [PAPER TYPE].

Paper Type Paper Thickness

Setting value for the operator

panel

Setting of the

[Paper Thickness]

of the Printer

Driver:*

Paper Thickness Paper Type*

Plain Paper 64-82g/m

Plain Paper Plain Paper Plain Paper

83-105g/m

Heavy Paper Heavy Paper

106-128g/m

Ultra Heavy 1 Paper Ultra Heavy 1 Paper

129-200g/m

Ultra Heavy 2 Paper Ultra Heavy 2 Paper

Envelope - - - -

Label 0.1 to 0.17 or less. Ultra Heavy 1 Paper Label Label 1

0.17-0.2mm Ultra Heavy 2 Paper Label 2

: This is congured to [Plain Paper] at the time of shipment from the factory.

: You can congure the paper thickness and paper type by using the operator panel or the printer

driver. If you use the printer driver, the printer driver settings take precedence. If [Automatic

Selection] is selected as the [Paper Source] of the printer driver or [Printer Settings] is selected as

the [Paper Thickness], the operator settings take precedence.

The printable thickness for duplex printing is 64 to 105 g/m2.

: No setting is required for envelopes.

Memo

•

If paper thickness is set to Ultra Heavy 1 or Ultra Heavy 2 and paper type is set to [Label], the printing speed becomes

slower.

Oki MC780fx User Manual

Other manuals for Oki MC780fx