- 69 -
How to Load the Paper
1
2
4
5
6
3
7
After setting the paper size and
paper type, press [OK].
The menu returns to the BASIC menu.
8
Select other copy modes as
required, and then press the
[START] button on the control
panel.
About Auto Tray Switching
(Auto Tray Switch Function)
When a tray or multi-purpose tray runs out
of paper while printing, the machine locates
another tray or multi-purpose tray with the same
size of paper and begins feeding paper from that
tray.
If an additional tray unit has been installed, up
to 1460 pages can be continuously printed or
copied (A4 paper only).
Q Paper Switch Order.
When operating the automatic paper feed
funtion, the following order of priority for the
tray or multi-purpose tray is selected.
Memo
•
If you are loading non-conventional paper such as OHP lm
or labels in the multi-purpose tray, the auto tray switch may
mistakenly use the wrong paper source. In this situation,
we recommend conguring paper other than plain paper in
advance.
When you are printing copies or
received faxes.
Tray 1 Tray 2 Tray 3 Tray 4 MP Tray
When you are printing from the
computer.
Starting from the tray or multi-purpose tray that
is currently being used, follow the settings of the
[Paper Source] of the printer driver.
To Next Page
Loading...
Need help?
General
