25 POWER PRE-STRETCH CARRIAGE
The power pre-stretch carriage can be used in place of the standard film roll carriage, to pre-
stretch the film before wrapping. The carriage logic is independent from the machine, and therefore
does not interact in any way with the control panel.
The power pre-stretch carriage is easily interchangeable with the standard carriage. The Client can
therefore decide to replace the standard carriage with the power pre-stretch carriage and vice
versa without having to intervene on the machine in any way.
Please find below a list of the warning pictograms and plates located on the carriage.
The plates and pictograms are located as shown in the picture.
CRESCO UCP REV10 36
To Next Page
Loading...
Need help?
General
