Omron CK3E Series User Manual


Attribute ID for Output Assembly
Attribute ID
(hex)
Parameter
name
Description Attribute Data type Value (hex)
03 Data Output data Read and
write
ARRAY of BYTE 0 to 504 byte data
04 Size Output data size Read UINT 0 to 1F8

Attribute ID for Input Assembly
Attribute ID
(hex)
Parameter
name
Description Attribute Data type Value (hex)
03 Data Input data Read and write ARRAY of BYTE 0 to 504 byte data
04 Size Input data size Read UINT 0 to 1F8
A-3-3
TCP/IP Interface Object (Class ID: F5 Hex)
The TCP/IP Interface object is intended to configure the TCP/IP interface.
Service Code
Service code
(hex)
Parameter name Description
Supported services
Classes Instances
01 Get_Attribute_All Reads the values of all attributes. Supported Supported
0E Get_Attribute_Single Reads the value of the specified attribute. Supported Supported
10 Set_Attribute_Single Writes the value of the specified attribute. Not supported Supported
Class ID and Instance ID
The class ID and instance ID are as shown below.
ID type Value (hex)
Class ID F5
Instance ID 01
Attribute ID
The attribute IDs for instances are as shown below.
Attrib-
ute ID
(hex)
Parameter name Description
Attrib-
ute
Data type Value (hex)
01 Status IP address setting status of
the interface
Read DWORD 00000001 (al-
ways)
02 Configuration Capability Controller configurations
and setup that can be set to
the interface.
Read DWORD 00000000 (al-
ways)
03 Configuration Control Sets the method to used to
set the IP address when
the interface starts.
Read DWORD 00000000 (al-
ways)
Appendices
A-7
CK3E-series Programmable Multi-Axis Controller User’s Manual Hardware (I610)
A-3 Supported CIP Objects
A
A-3-3 TCP/IP Interface Object (Class ID: F5 Hex)

Omron CK3E Series Specifications

General

Brand	Omron
Model	CK3E Series
Category	Controller
Language	English