Omron CK3E Series User Manual

Attrib-
ute ID
(hex)
Parameter name Description
Attrib-
ute
Data type Value (hex)
04 Physical Link Object Path to the physical link ob-
ject
Read Struct ---
Path Size Path size Read UINT 0002 (always)
Path Fixed path Read Padded
EP
A
TH
20F62401 (al-
ways)
05 Interface Configuration Interface configuration Read Struct ---
IP Address IP address Read UDINT Set value
Network Mask Subnet mask Read UDINT Set value
Gateway Ad-
dress
Default gateway Read UDINT Set value
Name Server Primary name server Read UDINT Set value
Name Server 2 Secondary name server Read UDINT Set value
Domain Name Domain name Read STRING Set value
06 Host Name Host name Read STRING Set value
08 TTL Value TTL value Read UINT 01 (always)
09 Mcast Config Multicast configuration Read Struct ---
Alloc Control Multicast address allocation
method
Read USINT 00 (always)
Reserved Reserved Read USINT 00 (always)
Num Mcast Number of multicast ad-
dresses
Read UINT 01 (always)
Mcast Start Addr Start multicast addresses Read UDINT Set value
0D Encapsulation Inactivity
T
imeout
Encapsulation inactivity
timeout time
Read
and
write
UINT
Set value (120
seconds by de-
fault)
A-3-4
Ethernet Link Object (Class ID: F6 Hex)
The Ethernet link object is intended to retrieve various information on the Ethernet link.
Service Code
Service code
(hex)
Parameter name Description
Supported services
Classes Instances
01 Get_Attribute_All Reads the values of all attributes. Supported Supported
0E Get_Attribute_Single Reads the value of the specified attribute. Supported Supported
4C Get_and_Clear Specifies attribute 4, 5, 12, or 13 and re-
sets the attribute to 0.
Not supported Supported
Class ID and Instance ID
The class ID and instance ID are as shown below.
ID Type Value (hex)
Class ID F6
Appendices
A-8
CK3E-series Programmable Multi-Axis Controller User’s Manual Hardware (I610)

Omron CK3E Series Specifications

General

Brand	Omron
Model	CK3E Series
Category	Controller
Language	English