Omron CS1G-CPU42H User Manual

CPU Unit Operation Section 9-1
184
9-1 CPU Unit Operation
9-1-1 General Flow
The CPU Unit operation of the Ladder Engine flows as follows (excluding
when Step Run).
Note Refer to 9-2 Cycle Time and Time for the computer cycle time and the virtual
cycle time.
Personal
computer
c
y
cle time
Startup
Startup (Initial) process
Overseeing processing
Computing process (UM1)
Computing process (UM2)
Virtual
cycle time
(
a+b
)
b
a
· Initialize I/O memory
area/System work
area
· Download automati-
cally from the file
memory
· Monitor the DIP
switch
· Back up I/O memory
areas
· Execute the ladder diagram for applications
· Run process: Execute the user program
· Error process: Clear the I/O memory area
when an error occurs (excluding when executing
a FALS)
· Clear I/O memory area
and check the user
memory area (UM)
· Clear force-set/reset,
etc.
· Execute the ladder diagram for debugging
· Run process: Execute the user program
· Error process: Clear the I/O memory area
when an error occurs (excluding when executing
a FALS)
The CX-Simulator does not execute I/O refresh.
However, the virtual I/O refresh time is added to the
cycle time in the virtual cycle time.
The CX-Simulator does not execute peripheral
servicing excluding for the network communications
unit, the Serial Communications Boards/Unit, and
file service.
I/O refresh
Peripheral servicing
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr

Omron CS1G-CPU42H Specifications

General

Brand	Omron
Model	CS1G-CPU42H
Category	Controller
Language	English