Omron E5DC User Manual

2 - 61
2 Preparations
E5@C Digital Temperature Controllers User’s Manual (H174)
2-2 Using the Terminals
2
2-2-10 Wiring
 Recommended Flat-blade Screwdriver
Use a flat-blade screwdriver to connect and remove wires.
Use the following flat-blade screwdriver.
* You can purchase the SZF 0-0,4 × 2,5 flat-blade screwdriver made by PHOENIX CONTACT with OMRON
model XW4Z-00B.
In the connection diagrams, the left side of the terminal numbers represents the inside of the Digital
Controller and the right side represents the outside.
 Power Supply
Power Consumption
*1 The only option number that is possible for the E5CC-U is 000.
• These models have reinforced insulation between the input power supply, the relay outputs, and
other terminals.
 Inputs
Refer to 2-2-1 E5CC Terminal Block Wiring Example, 2-2-2 E5CC-U Terminal Block Wiring Example, 2-2-3
E5CC-B Terminal Block Wiring Example, 2-2-4 E5EC/E5AC Terminal Block Wiring Example, 2-2-5 E5EC-B
Terminal Block Wiring Example, 2-2-6 E5DC Terminal Block Wiring Example, 2-2-7 E5DC-B Terminal Block
Wiring Example or 2-2-8 E5GC Terminal Block Wiring Example for the terminal arrangement.
Model Manufacturer
ESD 0,40 × 2,5 Wera
SZS 0,4 × 2,5
SZF 0-0,4 × 2,5 *
Phoenix Contact
0.4 × 2.5 × 75 302 Wiha
AEF.2,5 × 75 Facom
210-719 Wago
SDI 0.4 × 2.5 × 75 Weidmuller
2-2-10 Wiring
Input Power Supply
E5CC, E5CC-U, or
E5CC-B
*1
E5EC or E5EC-B E5AC
E5DC or
E5DC-B
E5GC
Options
No.: 000
Options
No.:
Not 000
Options
No.: 000
Options
No.:
Not 000
Options
No.: 000
Options
No.:
Not 000
100 to 240 VAC,
50/60 Hz
5.2 VA
max.
6.5 VA
max.
6.6 VA
max.
8.3 VA
max.
7.0 VA
max.
9.0 VA
max.
4.9 VA
max.
5.9 VA
max.
24 VAC, 50/60 Hz 3.1 VA
max.
4.1 VA
max.
4.1 VA
max.
5.5 VA
max.
4.2 VA
max.
5.6 VA
max.
2.8 VA
max.
3.2 VA
max.
24 VDC (no polarity) 1.6 W
max.
2.3 W
max.
2.3 W
max.
3.2 W
max.
2.4 W
max.
3.4 W
max.
1.5 W
max.
1.8 W
max.
0.4 mm
2.5 mm dia.
2.5 mm
Side Front

Omron E5DC Specifications

General

Brand	Omron
Model	E5DC
Category	Temperature Controller
Language	English